Flux / Electrode Drying Oven |
 |
- 40 mm X 40 mm X 5 mm (Small Size)
- 50 mm X 50 mm X 5 mm (Big Size)
- 18 Swg. for Temp. up to 250 C
- 16 Swg. for Temp. up to 450 C The inside can be in S.S. 304 / S.S. 316 / S.S 310
50 TO 600 °C
Single door or two door is provided suitable to inner working space. Doors are fixed on heavy duty hinges and provided with a latch arrangement. A hand / mechanically operated vertical lifting type door can be provided.
Glass Wool / Resin Bond Wool / Ceramic Wool insulation is provided according to working temperature
The oven is heated electrically by specially designed S.S. Tubular / Fin type / Nicrome Wire / Refractory type heater with a large surface area to prevent burn out. The heaters are rewireable type and are accessible for service, inspection and replacement from outside the oven. The oven also be heated by passing steam or thermic fluid or hot water/oil through specially designed coil made from continuous finned tubes. The oven can also be heated by LPG / LDO .
Forced air circulation inside the Oven is provided by one or more axial flow or centrifugal blower fans. Arrangement for recirculation, supply of fresh air and discharge of vapours is provided the air distribution system inside the Oven is designed to suit the application and the nature of product. We provide Cross flow, through flow, Vertical and Horizontal air flow system.
Temperature inside the Oven is controlled by Thermostate or Digital Temp. controller or PID Controller with Thyristor Power Pack. Depending upon application.
Strip Chart Recorder / Circular Chart Recorder / PLC Controller.
Ball catch type or Special locking arrangement depending upon application.
Trays and Trolly and other type of loading arrangement are provided to suit application.
Inside heat resist Aluminium Silver out side Nickel Grey OR Any plain color.
 |
 |